LPG & CNG Injektoren Europegas Injector Rail 4 Cilinder EG2000 E20-67R-01-1057

Details

EG2000 is a high quality injector with a piston design. The compact housing and the connector parallel to the gas outlet port facilitate the assembly process. One type of injector, without the need for additional adapters, can be used for single installation using the EG Divide bus or in series on the EuropeGAS bus (3 or 4 cylinders). EG2000 injectors are designed for LPG and CNG systems. They are characterized by high resistance to low quality gas, as well as fast and precise gas dosage. Short opening and closing times allow quick reactions to sudden changes in engine load. The EG2000 injector, with its optimum dose of gaseous fuel, ensures that the engine runs smoothly and eliminates the noticeable differences between the gas and petrol supply.

At the International GasShow, EG2000 received the INPRO award for the best product in the category of automotive gas systems.

Technical Data

• Maximum static flow, 3 mm nozzle (at 1.2 bar): 100 l/min
• Maximum operating pressure: 4.5 bar
• Supply voltage: 12 V
• Operating temperature: -40 ÷ 120°C
• Connector adapted to the plug: AMP Superseal 282080-1
• Opening time: < 2.1 m/s
• Closing time: < 1.3 m/s
• Resistance of coil: 1.9 Ohm
• Gas outlet: Calibration nozzles per line ø5
• Effective output per cylinder: 12 – 45 HP
• Versions: for single or rail mounting on 3 or 4 cylinders.
• Calibration nozzle sizes: 1.9 mm; 2.1 mm; 2.4 mm (to be ordered seperately)

Homologatie injector:

• E20-67R-01 1057: https://www.vanmeenen.com/wp-content/uploads/2022/01/EG2000_E20_67R-01_1057.pdf
• E20-110R-01-0059: https://www.vanmeenen.com/wp-content/uploads/2022/01/EG2000_E20_110R-01_0059.pdf  

Homologatie rail: E8-67R-01 5997 / E8-110R-00 5998