+32 474 33 56 56 | order@vanmeenen.com
Login EN
Did you forget your password or username? Please request your password here.
Request password"
No account yet? Request login
Victron MultiPlus-II 48/4k5/55-32 230V InverterPMP482405012
€ 742.51
In shopping basket
Delivered by 07/07
Victron Energy MultiPlus-II 48/4k5/55-32 230V Inverter Charger 48V EAN 8719076065975
The Victron MultiPlus-II 48/4k5/55-32 is a professional-grade 48V inverter charger combining a powerful pure sine wave inverter and an adaptive battery charger. This multifunctional power supply is specifically engineered for an off-grid solar system, marine installations on boats and yachts, and mobile applications in motorhomes. It delivers a continuous output of 4500 VA (3600 Watts).
Technical Features and Capability This advanced smart charger is equipped with PowerAssist technology, preventing overloads from a limited shore power or generator source by automatically adding battery power when peak demands exceed supply. It functions as a dependable UPS uninterruptible power supply with a 20ms switchover, ensuring sensitive electronics remain active. The VE.Bus port supports parallel connection of up to six units and three-phase configuration for scalable power systems.
Key Specifications and Benefits
Features an integrated 55A charger with adaptive technology and a high-speed 32A transfer switch.
Dual AC outputs, with the second auxiliary output dropping heavy loads during grid failure to protect the battery.
Optimized for home battery storage and autonomous ESS energy storage systems with up to 96% efficiency.
Robust steel enclosure with extensive electronic protections against short-circuits, overload, and over-temperature.
Installation and Operating Instructions Mount the Victron MultiPlus-II vertically on a solid, non-flammable surface with adequate cooling clearance. Connect the 48V battery bank using correctly rated cables and fuses. Connect the AC input and AC output lines to your distribution panel. Configure the charging parameters to match your battery chemistry (such as Lithium or AGM) via the software before powering up. For remote monitoring and control via the VictronConnect app or VRM portal, pair the device with an external Cerbo GX.