Injectors Dymco LPG/CNG Injector 4 cilinder green 3 Ohm

Details

Flow rate [cc/stroke]: 63cc

Matches Keihin blue
- Can be used on Prins LPG installation to replace Keihin injectors.
- Do not forget to order: KET MG641152-4 plug connection (see matching products). The plug connection at the Keihin injectors is different, you must mount a different chip on the injectors when replacing
- After replacement, you must adjust the car again.

Model No. Dymco: GISM-i1000
Homologation LPG: E11 67R-010044
Homologation CNG: E11 110R-000064

Also sold under the name AG Centrum type Hercules GISM (as part of the AG Zenith system) and under the name Digitronic Dymco.
Power: 18-27 KW/cylinder (corresponds to Hana type B red or Keihin 63cc orange).

Properties:
- Plug connection: KET MG641152-4 chip female 2 pins
You can order the male chip that fits on the injectors separately under matching products
- Top Feed type injector, suitable for both LPG and CNG
- No leakage and low noise
- Approval pressure: 1.2 ± 0.1 bar
- Operating temperature range: -40 ~ +120
- Operating voltage range: DC 6V ~ DC 18V
- Working pressure: 20~420KPa
- Peak and hold current type
- Filter built in at inlet nipple
- Maximum peak current: 2.0 A (at DC12V)
- Maximum holding current: 0.8 A (at DC 12V)
- Maximum working pressure: 450KPa

Resistance: 3 ohms.
Opening time: 2.25 ms
Closing time: 0.78ms