Regulators Impco LB LPG Converter vaporizer

Details

Impco LB Vaporizer

The Model L is a two stage regulator/vaporizer. These units are coolant heated and are able to provide liquid vaporization to supply up to 325 hp (242 kW) peak or 200 hp (150 kW) continuous in industrial engine applications. The Model L regulator provides a negative outlet pressure of -1.5” w.c. (-0.37 kPa). No optional pressures are available. The Model L offers economical performance with full features; rear fuel inlet, and primary and secondary diagnostic test ports. Optional silicone diaphragm materials are also available, LB-2.

With European Homologation E4-67R010090

This reducer can be used as an alternative for the following reducer:
OHG Model X-1 (Santa Fe Springs Ca. 90670 09-2 Listed 41L8 Automotive Vaporizer-regulatorfor LP GAS)

 Connections

• Fuel Inlet: 1/4″ NPT
• Fuel Outlet: 1″ NPT 
• Primary Test Port: 1/8″ NPT
• Secondary Test Port: 1/8″ NPT
• Vent Balance Line Connection: 1/8″ NPT

SPECIFICATIONS
Fuel Type …………………………………… LPG Liquid/Vapor
Inlet Pressure
Maximum …………………………. 312 psi (21.51 Bar)
Minimum ………………………….. 30 psi (207 kPa)
Outlet Pressure (Nominal) …………….. -1.5” w.c. (0.37 kPa)
HP/kW ……………………………………….. 325 hp (242 kW) peak, 200 hp (150 kW) continuous
Operating Temperature Range ……… -40°F to +250°F (-40°C to +121°C)
Fuel Filtration ……………………………… 40 micron
Heating Chamber Source ……………… Required for liquid LPG
Mounting Position ………………………… Vertical, with outlet down recommended. Horizontal position
can be used when fuel contamination can be controlled
with HD-5 specified LPG fuel.
Applications ………………………………… Mobile, industrial and automotive