Details
Cylindrical LPG Tank GZWM 45L - 315 mm x 648 mm, 4-Hole
This cylindrical LPG tank from GZWM has a capacity of 45 liters, with a diameter of 31.5 cm and a length of 64.8 cm. This model is equipped with a 4-hole appendage plate, suitable for mounting four different types of valves.
Approval Number: E20 67R-01 0611
Year of construction: 2018/07
Capacity: Gross 45 liters (net usable volume: 80% = 36 liters)
Pressure Class: 67R-01 Class 1 (maximum pressure: 30 bar)
Mounting: The installation is done horizontally, with the help of a tank frame and straps, which you can order at the bottom of this page under corresponding products.
This tank is primarily intended for use as storage for liquid LPG, a commonly used automotive fuel. It is suitable for both built-in and under-chassis installation and compatible with most LPG systems, including Landi Renzo, Vogels VGI, Eurogas, Prins VSI, BRC, Romano, Tartarini, and AEB. Not suitable for systems with LPG pumps such as Vialle LPi or Icom JTG.
The tank is equipped with four holes for mounting the following appendages, which need to be ordered separately:
- An 80% fill valve with a non-return valve
- An overpressure valve (vent valve)
- An electric withdrawal tap
- A content meter (float)
An optional tank cabinet can be placed around these appendages to capture any emitted gases. A filling hose can be connected to the 80% fill valve with an elbow joint, which is then connected to an external filler on the vehicle. The liquid gas in the tank must be converted to gas form via a vaporizer before use.