Details
LPG ring tank with capacity of 122 liters
Mounting points: 4 x on top
Tank position: Horizontal
Position of Fittings: Centrally placed below 52 degrees
Tank capacity: Gross 122 L (80% = 97.6 L)
Dimensions: Ø720 mm x Height 350 mm
Production date: 2023/02
Manufacturer code: F72012214IGAT1CA (type F72012214L+F)
Brand: STAKO
Please order the valves separately. You will need:
- Electric tank valve with coupling 5/16"UNF - 1/2"-20 SAE 45° Flare Male (12.5 mm)
- Pressure relief valve 27 bar
- Tank float (standard without tank sensor)
- 80% fill valve with elbow with coupling 1/2"UNF - 3/4"-16 SAE 45° Flare Male (19 mm)
- Tank gas tight box(optional, not required for undermount)
Application: This type of LPG tank contains liquid LPG used as automobile fuel. Suitable for in-car and undercarriage installation, and for most LPG installations: Van Meenen Premium, Landi Renzo, Vogels VGI, Eurogas, Prins VSI, BRC, Romano, Tartarini, AEB, etc.
Tank gas tight cover as an option
A tank valve cover (fittings box) is used to collect any vented gas from the pressure relief valve and then remove it through a vent hose to the outside. A tank enclosure is required if the LPG tank is placed inside the vehicle (e.g. in the trunk). A tank enclosure is not necessary if the LPG tank is installed outside the cabin, e.g. in the undercarriage or in the open bed of a pickup truck. In that case, the LPG tank can vent directly into the open air.
Tank sensor option
A tank sensor can be attached to the outside of the tank float and moves with the magnetic field of the tank float, varying the electrical resistance value. The correct resistance pattern for your car depends on the type of LED indicator and the gas system. We do not provide a tank sensor as standard, as we do not know your application. If you need a replacement, you can easily transfer your current tank sensor from your old tank to the new tank. We optionally provide a 0-90 Ohm sensor (most common type). The tank does not need to be opened to install or transfer the tank sensor. It can be easily attached to the outside using two small screws.