Details
AEB Polymer Injector Nozzle D1.6 Red - 1.6mm Calibration Nozzle for EVO LPG Injectors
The AEB polymer injector nozzle with a diameter of 1.6 mm is a precision calibration nozzle with red colour coding for use in LPG injectors. This spray nozzle is manufactured from high-quality polymer material and is compatible with AEB RP2SU, RP3SU and RP4SU injector rails, as well as with Landi Renzo EVO and King sequential gas systems. The nozzle is supplied with O-ring seal for a leak-proof connection.
Technical specifications
- Internal diameter: 1.6 mm
- Colour coding: Red
- Material: Polymer (plastic)
- External diameter: 5.8 mm
- Compatibility: AEB RP2SU, RP3SU, RP4SU injector rails
- Included: O-ring seal
- Type: Calibration nozzle
Application table per cylinder
The 1.6 mm nozzle is suitable for small to medium-sized engines with cylinder capacity and power according to the table below:
- 200-280cc cylinders: 10-15 kW per cylinder
- 280-370cc cylinders: 10-15 kW per cylinder
For engines with higher power per cylinder or larger cylinder capacity, larger nozzle diameters (1.8 mm, 2.0 mm, 2.2 mm, 2.4 mm or 2.6 mm) are required.
Installation and use
The injector nozzle is placed in the LPG injector and determines the amount of LPG gas metered to the engine. Always replace all nozzles simultaneously and use the same diameter for all cylinders. When changing the nozzle size, the software of the LPG computer must be adjusted via calibration to ensure optimal performance. When in doubt, check the passage diameter of your current nozzles with a calibrated drill bit, especially if they may have been reamed by a specialist.
Important advice
Preferably use the same nozzle diameter as your original nozzles. When choosing a different size, recalibration of the gas system is necessary. Some LPG specialists ream nozzles for extra power, so always check the actual passage before ordering replacement nozzles.