Hana injector H2001 GOLD Rail type

Hana injector H2001 GOLD Rail type
H2001-Gold-RAIL

€ 37.91

In shopping basket

On stock

Details

HANA H2001 Rail Type, Rail Mounted LPG, CNG Injector calibrated with exchangeable brass nozzles.

HANA LPG/CNG Injectors with long life-span (around 500 million cycles, 200.000KM) are one of the best on the market.

Power: 41-50 HP/cyl
HANA H2001 GOLD – Rail Type, Rail Feed from Top
Corresponds to Keihin yellow
Homologation LPG E4-67R-010213 CLASS 2
Homologation CNG E8-110R-004686-02 C
Factory: HANA ENGINEERING KOREA
Flow rate control by calibrating nozzles(B, C, D nozzles) – GOLD type
Dimensions: https://www.vanmeenen.com/wp-content/uploads/2021/11/Hana-h2001.pdf
Electronic connector: AMP superseal 2 way Connector [AMP 282104-1]

Advantages

Low noise level
High heat resistance
Very precise injectors
The fuel quantity (flow characteristics) does not change frequently even when used continuously
Best performance and reliability

HANA H2001 Gold Characteristics
Feed type: Top
Voltage: 12V DC
Resistance: 1.9 Ohm
Max pressure: 4.0 bar
Operation pressure: 1.2 bar
Flow rate: 65-115 L/min
Opening time: 2.36 ms
Closing time: 1.2 ms
Pick Current: 4A
Hold Current: 2A
Size: 70/25mm
Fuel: LPG/CNG/LNG/Hydrogen

Hana Comparison Chart

HANA H2001	Previous markers	Nozzle	Res.	Power HP/Cylinder (±15%)	Measured with
HANA H2001	Previous markers	Nozzle	Res.	0.8bar/1bar/1.2bar	Measured with
Type A+(BLUE)	Type A+(BLUE)	–	1.3 Ohm	40 / 50 / 60 HP	Pressure 0.8/1.0/1.2 bar(with max.load)
Type A(GOLD)	Type A(GREEN)	–	1.9 Ohm	33 / 42 / 50 HP
	Type B(RED)	2.4mm One stripe\|	1.9 Ohm	26 / 32 / 39 HP
	Type C(BLACK)	2.1mm Two stripes\|\|	1.9 Ohm	20 / 25 / 30 HP
	Type D(VIOLET)	1.9mm Three stripes\|\|\|	1.9 Ohm	15 / 19 / 24 HP