Vapour tank 120x360x1298 | LPG-CNG Van Meenen

Vapour tank 120x360x1298
DT360120

€ 519.15

On stock

Details

How to fit the tank? What is the right position?

You need to install the valve plate on 105°, so this is 15° lower than the horizontal line. There is a cross on the tank, that cross needs to be horizontal. When the cross is horizontal, the distance between the bottom an the top need be the same.

The valves need to be mounted like on the pictures from our installation:

- filling valve on the right side

- outlet valve on the left

What is written on the tank should be in a readable position. Otherwise the tank is fitted upside down.

Matching articles

Fittings for on tank (4-hole), without case (with Valtek BFC electrovalve)

€ 159.27 On stock

Valve protection box GZWM E20-67R-010711

€ 55.39 On stock

Transmitter 0-90 ohm - Livello

€ 41.38 On stock

Outside filler flat ACME - filling hose straight

€ 34.42 On stock

Ledindicator with intergrated switch

€ 38.82 On stock

Propane pressure regulator 1,5 bar 1/4"Fx1/4"F

€ 48.25 On stock

Manual valve / yellow 1/4"Fx1/4"F

€ 24.73 On stock

KIT 8mm plastic pipe 6 meters + fittings

€ 35.57 On stock

Filling hose 1.50 m Straight x Straight

€ 52.89 On stock

Frame Diam. 360/120ltr.x1298mm GZWM, complete with belts

€ 57.26 On stock

Screw coupling with 1/4" external thread x 8mm PVC pipe

€ 7.70 On stock

Valves for vapour tank with manual outlet valve

€ 134.09 On stock

Fittings vapour tank with manual valve Shell

€ 134.09 On stock

LPG Vapour tanks Vapour tank 120x360x1298

Categories

Details

Matching articles